Arsenic and mercury exposure in different insect trophic guilds from mercury mining areas in Mexico.

The exposure to arsenic and mercury in various insect trophic guilds from two mercury mining sites in Mexico was assessed. The two study sites were La Laja (LL) and La Soledad (LS) mines. Additionally, a reference site (LSR) was evaluated for LS. The terrestrial ecosystem was studied at LL, whereas both the terrestrial ecosystem and a stream called El Cedral (EC) were assessed at LS. The study sites are situated in the Biosphere Reserve Sierra Gorda (BRSG). Mercury vapor concentrations were measured with a portable analyzer, and concentrations of arsenic and mercury in environmental and biological samples were determined through atomic absorption spectrophotometry. Both pollutants were detected in all terrestrial ecosystem components (soil, air, leaves, flowers, and insects) from the two mines. The insect trophic guilds exposed included pollinivores, rhizophages, predators, coprophages, and necrophages. In LS, insects accumulated arsenic at levels 29 to 80 times higher than those found in specimens from LSR, and 10 to 46 times higher than those from LL. Similarly, mercury exposure in LS was 13 to 62 times higher than LSR, and 15 to 54 times higher than in LL. The analysis of insect exposure routes indicated potential exposure through air, soil, leaves, flowers, animal prey, carrion, and excrement. Water and sediment from EC exhibited high levels of arsenic and mercury compared to reference values, and predatory aquatic insects were exposed to both pollutants. In conclusion, insects from mercury mining sites in the BRSG are at risk.

Health and ecological risk of heavy metals in agricultural soils related to Tungsten mining in Southern Jiangxi Province, China.

Background: Dayu County, a major tungsten producer in China, experiences severe heavy metal pollution. This study evaluated the pollution status, the accumulation characteristics in paddy rice, and the potential ecological risks of heavy metals in agricutural soils near tungsten mining areas of Dayu County. Furthermore, the impacts of soil properties on the accumulation of heavy metals in soil were explored. Methods: The geo-accumulation index (Igeo), the contamination factor (CF), and the pollution load index (PLI) were used to evaluate the pollution status of metals (As, Cd, Cu, Cr, Pb, Mo, W, and Zn) in soils. The ecological risk factor (RI) was used to assess the potential ecological risks of heavy metals in soil. The health risks and accumulation of heavy metals in paddy rice were evaluated using the health risk index and the translocation factor (TF), respectively. Pearson's correlation coefficient was used to discuss the influence of soil factors on heavy metal contents in soil. Results: The concentrations of metals exceeded the respective average background values for soils (As: 10.4, Cd: 0.10, Cu: 20.8, Cr: 48.0, Pb: 32.1, Mo: 0.30, W: 4.93, Zn: 69.0, mg/kg). The levels of As, Cd, Mo, and tungsten(W) exceeded the risk screening values for Chinese agricultural soil contamination and the Dutch standard. The mean concentrations of the eight tested heavy metals followed the order FJ-S > QL > FJ-N > HL > CJ-E > CJ-W, with a significant distribution throughout the Zhangjiang River basin. Heavy metals, especially Cd, were enriched in paddy rice. The Igeo and CF assessment indicated that the soil was moderately to heavily polluted by Mo, W and Cd, and the PLI assessment indicated the the sites of FJ-S and QL were extremely severely polluted due to the contribution of Cd, Mo and W. The RI results indicated that Cd posed the highest risk near tungsten mining areas. The non-carcinogenic and total carcinogenic risks were above the threshold values (non-carcinogenic risk by HQ > 1, carcinogenic risks by CR > 1 × 10-4 a-1) for As and Cd. Correlation analysis indicated that K2O, Na2O, and CaO are main factors affecting the accumulation and migration of heavy metals in soils and plants. Our findings reveal significant contamination of soils and crops with heavy metals, especially Cd, Mo, and W, near mining areas, highlighting serious health risks. This emphasizes the need for immediate remedial actions and the implementation of stringent environmental policies to safeguard health and the environment.

Enhanced efficiencies on purifying acid mine drainage in constructed wetlands based on synergistic adsorption of attapulgite-soda residue composites and microbial sulfate reduction.

Constructed wetlands (CWs) are a promising approach for treating acid mine drainage (AMD). However, the extreme acidity and high loads of heavy metals in AMD can easily lead to the collapse of CWs without proper pre-treatment. Therefore, it is considered essential to maintain efficient and stable performance for AMD treatment in CWs. In this study, pre-prepared attapulgite-soda residue (ASR) composites were used to improve the substrate of CWs. Compared with CWs filled with gravel (CWs-G), the removal efficiencies of sulfate and Fe, Mn, Cu, Zn Cd and Pb in CWs filled with ASR composites (CWs-ASR) were increased by 30% and 10-70%, respectively. These metals were mainly retained in the substrate in stable forms, such as carbonate-, Fe/Mn (oxide)hydroxide-, and sulfide-bound forms. Additionally, higher levels of photosynthetic pigments and antioxidant enzyme activities in plants, along with a richer microbial community, were observed in CWs-ASR than in CWs-G. The application of ASR composites alleviated the adverse effects of AMD stresses on wetland plants and microorganisms. In return, the increased bacteria abundance, particularly SRB genera (e.g., Thermodesulfovibrionia and Desulfobacca), promoted the formation of metal sulfides, enabling the saturated ASR adsorbed with metals to regenerate and continuously capture heavy metals. The synergistic adsorption of ASR composites and microbial sulfate reduction maintained the stable and efficient operation of CWs. This study contributes to the resource utilization of industrial alkaline by-products and promotes the breakthrough of new techniques for low-cost and passive treatment systems such as CWs.

Highly structured populations of copepods at risk to deep-sea mining: Integration of genomic data with demogenetic and biophysical modelling.

Copepoda is the most abundant taxon in deep-sea hydrothermal vents, where hard substrate is available. Despite the increasing interest in seafloor massive sulphides exploitation, there have been no population genomic studies conducted on vent meiofauna, which are known to contribute over 50% to metazoan biodiversity at vents. To bridge this knowledge gap, restriction-site-associated DNA sequencing, specifically 2b-RADseq, was used to retrieve thousands of genome-wide single-nucleotide polymorphisms (SNPs) from abundant populations of the vent-obligate copepod Stygiopontius lauensis from the Lau Basin. SNPs were used to investigate population structure, demographic histories and genotype-environment associations at a basin scale. Genetic analyses also helped to evaluate the suitability of tailored larval dispersal models and the parameterization of life-history traits that better fit the population patterns observed in the genomic dataset for the target organism. Highly structured populations were observed on both spatial and temporal scales, with divergence of populations between the north, mid, and south of the basin estimated to have occurred after the creation of the major transform fault dividing the Australian and the Niuafo'ou tectonic plate (350 kya), with relatively recent secondary contact events (<20 kya). Larval dispersal models were able to predict the high levels of structure and the highly asymmetric northward low-level gene flow observed in the genomic data. These results differ from most studies conducted on megafauna in the region, elucidating the need to incorporate smaller size when considering site prospecting for deep-sea exploitation of seafloor massive sulphides, and the creation of area-based management tools to protect areas at risk of local extinction, should mining occur.

Treating waste with waste: Lignin acting as both an effective bactericide and passivator to prevent acid mine drainage formation at the source.

Acid mine drainage (AMD) induced by pyrite oxidation is a notorious and serious environmental problem, but the management of AMD in an economical and environmentally friendly way remains challenging. Here, lignin, a natural polymer and abundant waste, was employed as both a bactericide and passivator to prevent AMD formation. The addition of lignin to a mimic AMD formation system inoculated with Acidithiobacillus ferrooxidans at a lignin-to-pyrite weight ratio of 2.5: 10 reduced the combined abiotic and biotic oxidation of pyrite by 68.4 % (based on released SO42-). Morphological characterization of Acidithiobacillus ferrooxidans revealed that lignin could act on the cell surface and impair the cell integrity, disrupting its normal growth and preventing biotic oxidation of pyrite accordingly. Moreover, lignin can be used alone as a passivator to form a coating on the pyrite surface, reducing abiotic oxidation by 71.7 % (based on released SO42-). Through multiple technique analysis, it was proposed that the functional groups on lignin may coordinate with iron ions on pyrite, promoting its deposition on the surface. In addition, the inherent antioxidant activity of lignin may also be actively involved in the abatement of pyrite oxidation via the reduction of iron. Overall, this study offered a "treating waste with waste" strategy for preventing AMD formation at the source and opened a new avenue for the management of AMD.

A novel magnetic graphene-loaded biochar gel for the remediation of arsenic- and antimony-contaminated mining soil.

Metalloid co-contamination such as arsenic (As) and antimony (Sb) in soils has posed a significant threat to ecological balance and human well-being. In this study, a novel magnetic graphene-loaded biochar gel (FeBG) was developed, and its remediation potential for the reclamation of AsSb spoiled soil was assessed through a six-month soil incubation experiment. Results showed that the incorporation of iron substances and graphene imparted FeBG with enhanced surface characteristics, such as the formation of a new FeO bond and an enlarged surface area compared to the pristine biochar (BC) (80.5 m2 g-1 vs 57.4 m2 g-1). Application of FeBG significantly decreased Na2HPO4-extractable concentration of As in soils by 9.9 %, whilst BC addition had a non-significant influence on As availability, compared to the control. Additionally, both BC (8.2 %) and FeBG (16.4 %) treatments decreased the Na2HPO4-extractable concentration of Sb in soils. The enhanced immobilization efficiency of FeBG for As/Sb could be attributed to FeBG-induced electrostatic attraction, complexation (Fe-O(H)-As/Sb), and π-π electron donor-acceptor coordination mechanisms. Additionally, the FeBG application boosted the activities of sucrase (9.6 %) and leucine aminopeptidase (7.7 %), compared to the control. PLS-PM analysis revealed a significant negative impact of soil physicochemical properties on the availability of As (ß = -0.611, P < 0.01) and Sb (ß = -0.848, P < 0.001) in soils, in which Sb availability subsequently led to a suppression in soil enzyme activities (ß = -0.514, P < 0.01). Overall, the novel FeBG could be a potential amendment for the simultaneous stabilization of As/Sb and the improvement of soil quality in contaminated soils.

Genomic characterization of a novel ureolytic bacteria, Lysinibacillus capsici TSBLM, and its application to the remediation of acidic heavy metal-contaminated soil.

Soil heavy metal contamination is an essential challenge in ecological and environmental management, especially for acidic soils. Microbially induced carbonate precipitation (MICP) is an effective and environmentally friendly remediation technology for heavy metal contaminated sites, and one of the key factors for its realization lies in the microorganisms. In this study, Lysinibacillus capsici TSBLM was isolated from heavy metal contaminated soil around a gold mine, and inferred to be a novel ureolytic bacteria after phylogenomic inference and genome characterization. The urease of L. capsici TSBLM was analyzed by genetic analysis and molecular docking, and further applied this bacteria to the remediation of Cu and Pb in solution and acidic soils to investigate its biomineralization mechanism and practical application. The results revealed L. capsici TSBLM possessed a comprehensive urease gene cluster ureABCEFGD, and the encoded urease docked with urea at the lowest binding energy site (ΔG = -3.43 kcal/mol) connected to three amino acids threonine, aspartic, and alanine. The urease of L. capsici TSBLM is synthesized intracellularly but mainly functions extracellularly. L. capsici TSBLM removes Cu/Pb from the solution by generating heavy metal carbonates or co-precipitating with CaCO3 vaterite. For acidic heavy metal-contaminated soil, the carbonate-bound states of Cu and Pb increased significantly from 7 % to 16 % and from 23 % to 35 % after 30 days by L. capsici TSBLM. Soil pH improved additionally. L. capsici TSBLM maintained the dominant status in the remediated soil after 30 days, demonstrating good environmental adaptability and curing persistence. The results provided new strain resources and practical application references for the remediation of acidic heavy metal contaminated soil based on MICP.

The adaptability, distribution, ecological function and restoration application of biological soil crusts on metal tailings: A critical review.

A large amount of metal tailings causes many environmental issues. Thus, the techniques for their ecological restoration have garnered extensive attention. However, they are still in the exploratory stage. Biological soil crusts (BSCs) are a coherent layer comprising photoautotrophic organisms, heterotrophic organisms and soil particles. They are crucial in global terrestrial ecosystems and play an equal importance in metal tailings. We summarized the existing knowledge on BSCs growing on metal tailings. The main photosynthetic organisms (cyanobacteria, eukaryotic algae, lichens, and mosses) of BSCs exhibit a high heavy metal(loid) (HM) tolerance. BSCs also have a strong adaptability to other adverse conditions in tailings, such as poor structure, acidification, and infertility. The literature about tailing BSCs has been rapidly increasing, particularly after 2022. The extensive literature confirms that the BSCs distributed on metal tailings, including all major types of metal tailings in different climatic regisions, are common. BSCs perform various ecological functions in tailings, including HM stress reduction, soil structure improvement, soil nutrient increase, biogeochemical cycle enhancement, and microbial community restoration. They interact and accelerate revegetation of tailings (at least in the temperate zone) and soil formation. Restoring tailings by accelerating/inducing BSC formation (e.g., resource augmentation and inoculation) has also attracted attention and achieved small-scale on-site application. However, some knowledge gaps still exist. The potential areas for further research include the relation between BSCs and HMs, large-scale quantification of tailing BSCs, application of emerging biological techniques, controlled laboratory experiments, and other restoration applications.

Valorization of steelmaking slag and coal fly ash as amendments in combination with Betula pubescens for the remediation of a highly As- and Hg-polluted mining soil.

Soil pollution by As and Hg is a pressing environmental issue given their persistence. The intricate removal processes and subsequent accumulation of these elements in soil adversely impact plant growth and pose risks to other organisms in the food chain and to underground aquifers. Here we assessed the effectiveness of non-toxic industrial byproducts, namely coal fly ash and steelmaking slag, as soil amendments, both independently and in conjunction with an organic fertilizer. This approach was coupled with a phytoremediation technique involving Betula pubescens to tackle soil highly contaminated. Greenhouse experiments were conducted to evaluate amendments' impact on the growth, physiology, and biochemistry of the plant. Additionally, a permeable barrier made of byproducts was placed beneath the soil to treat leachates. The application of the byproducts reduced pollutant availability, the production of contaminated leachates, and pollutant accumulation in plants, thereby promoting plant development and survival. Conversely, the addition of the fertilizer alone led to an increase in As accumulation in plants and induced the production of antioxidant compounds such as carotenoids and free proline. Notably, all amendments led to increased thiolic compound production without affecting chlorophyll synthesis. While fertilizer application significantly decreased parameters associated with oxidative stress, such as hydrogen peroxide and malondialdehyde, no substantial reduction was observed after byproduct application. Thermal desorption analysis of the byproducts revealed Hg immobilization mechanisms, thereby indicating retention of this metalloid in the form of Hg chloride. In summary, the revalorization of industrial byproducts in the context of the circular economy holds promise for effectively immobilizing metal(loid)s in heavily polluted soils. Additionally, this approach can be enhanced through synergies with phytoremediation.

Joined-up governance for more complementary interactions between expanding artisanal small-scale gold mining and agriculture: Insights from Ghana.

Rising gold prices have led artisanal and small-scale gold mining (ASGM) operations to proliferate in sub-Saharan Africa, extending into agricultural areas. Little is known about the interactions between agriculture and mining in these new frontiers. This study aimed to investigate the impacts of ASGM on natural and physical livelihood capitals, ASGM's interactions with agriculture at household, community and institutional levels and the drivers underpinning those interactions, and the policy implications for the co-existence of sustainable agriculture and ASGM. Alongside literature review, field-work took place in Atiwa West District and Koforidua, Ghana using environmental field surveys, questionnaires, focus group discussions and interviews. Questionnaire and field survey data were analysed using descriptive statistics, with thematic analysis of interviews and focus group data. Findings revealed that most miners were unregulated, mined irresponsibly and degraded land, waterways, and farm roads. Over one-third of farmers (38%) suffered land degradation, and 79% of affected farmers' lands were not reclaimed. Farmers diversified into ASGM, and mining proceeds boosted farming. Young farmers (18-40 years) shifted into ASGM full-time because it is more lucrative. Yet, ASGM is not replacing agriculture: cocoa farming remains a vital economic activity. Informal ASGM generates short-term income at household level for some but imposes long-term costs at community level, linked to cumulative loss of agricultural land and degradation of forest areas and water bodies, creating tensions, and increasing vulnerability. Financial hardships faced by farmers, landowners' desire to benefit directly from gold and lack of law enforcement drive informal ASGM. There are no institutional linkages between the agricultural and mining sectors. More joined up governance across agriculture and mining is needed and between formal and informal (traditional) institutions. ASGM should be incorporated into broader rural development policy reforms that support farmers, incentivise miners to operate legally and responsibly and ensure effective stakeholder engagement.

[Silica exposure among miners at high altitude. Inhaled dose and evaluation methods in hypobaric environments]. / Exposición a sílice de mineros en altitud. Dosis inhalada, método de evaluación en condición de hipobaria.

OBJECTIVE: To evaluate silica exposure among Chilean miners at high altitude, using different methodological approaches, for the purpose of determining the safest method to control exposures.  Methods: The 46 miners in the sample worked at 3000 meters above sea level in nonstandard work shifts, consisting of four consecutive 12-hour days, followed by four consecutive days off. Silica samples were obtained in each of the jobs positions of these 46 high-altitude miners. The results of the concentrations are presented in mg/m3. Exposures were evaluated in compatison to the Threshold Limit Value (Method 1) and using two other methodologies that incorporate respiratory parameters (Methods 2 and 3). The proportion of miners at risk was determined with each of these methods and compared. RESULTS: Based on the Threshold Limit Value (Method 1), 43.48% of miners were classified as being at risk. With the other two methods that incorporate respiratory parameters, the proportion of overexposed miners was 82.61% with Method 2, and 73.91% with Method 3. CONCLUSIONS: Of the three methods analyzed, the one that considers the respiratory parameter minute volume, through the estimation of the inhaled dose, is the safest to define the group of miners at risk due to exposure to silica at high altitude.

OBJETIVO: Evaluar la exposición a sílice de mineros chilenos en altitud usando diferentes metodologías, con el propósito de determinar el método más seguro para controlar la exposición.  Métodos: Los 46 mineros que conforman la muestra trabajan a 3000 metros sobre el nivel del mar con sistema de turnos no convencionales, en jornadas de 12 horas diarias por 4 días consecutivos, después de los cuales se descansa por otros 4 días. Se tomaron muestras de sílice en cada uno de los puestos de trabajo de estos 46 mineros en altitud. Los resultados de las concentraciones se presentan en (mg/m3). La exposición se evaluó usando el Threshold Limit Value y otras dos metodologías que incorporan parámetros respiratorios. Se determinó el grupo de mineros en riesgo con cada uno de estos métodos y se comparó la proporción de mineros expuestos en cada caso. RESULTADOS: evaluando con el Threshold Limit Value (método 1) se obtuvo un 43,48% de mineros en riesgo. Con los métodos que incluyen parámetros respiratorios se obtuvo una proporción de mineros sobre-expuestos del 82,61% con el método 2, y 73,91% con el método 3. CONCLUSIONES: de los tres métodos analizados, el que considera el parámetro respiratorio volumen minuto, a través de la estimación de la dosis inhalada, es el más seguro para definir el grupo de mineros en riesgo por exposición a sílice a gran altura.

[Effects of coal mine waste dump on soil seed bank and vegetation distribution pattern]. / ç ¤çŸ¿æŽ’çŸ¸åœºå¯¹å‘¨è¾¹åœŸå£¤ç§å­åº“åŠæ¤è¢«åˆ†å¸ƒæ ¼å±€çš„å½±å“.

Long-term occupation of coal gangue dumping sites (CGDS) may destroy ecological environment of nearby area. However, how the CGDS affects the distribution pattern of soil seed banks and vegetation in the nearby area is not clear. In this study, we investigated soil seed bank and vegetation at different distances from the second CGDS of Yangchangwan in Ningdong mining area, Lingwu, Ningxia. The results showed that soil seed bank was mainly distributed in 0-10 cm layer and decreased with increasing soil depth. Species richness of soil seed bank and vegetation first increased and then tended to be stable with increasing distance to the CGDS. The influence range of CGDS on soil seed banks was 300-500 m and was 100-300 m on aboveground vegetation. The CGDS did not affect the vertical distribution pattern of soil seed bank, but significantly affected the horizontal distribution pattern of soil seed banks and aboveground vegetation. The key area of vegetation restoration around the CGDS was between 100 m and 300 m.

The rhizosphere microbiome reduces the uptake of arsenic and tungsten by Blechnum orientale by increasing nutrient cycling in historical tungsten mining area soils.

The growth of pioneer plants in metal mining area soil is closely related to their minimal uptake of toxic elements. Pioneer plants can inhibit the uptake of toxic elements by increasing nutrient uptake. However, few studies have focused on the mechanisms by which the rhizosphere microbiome affect nutrient cycling and their impact on the uptake of toxic elements by pioneer plants. In this study, we selected Blechnum orientale to investigate the potential roles of the rhizosphere microbiome in nutrient cycling and plant growth in a historical tungsten (W) mining area. Our results showed that while the arsenic (As) and W contents in the soil were relatively high, the enrichment levels of As and W in the B. orientale were relatively low. Furthermore, we found that the As and W contents in plants were significantly negatively correlated with soil nutrients (S, P and Mo), suggesting that elevated levels of these soil nutrients could inhibit As and W uptake by B. orientale. Importantly, we found that these nutrients were also identified as the most important factors shaping rhizosphere microbial attributes, including microbial diversity, ecological clusters, and keystone OTUs. Moreover, the genera, keystone taxa and microbial functional genes enriched in the rhizosphere soils from mining areas played a key role in nutrient (S, P and Mo) bioavailability, which could further increase the nutrient uptake by B. orientale. Taken together, our results suggest that rhizosphere microorganisms can improve pioneer plant growth by inhibiting toxic element accumulation via the increase in nutrient cycling in former W mining areas.

VOC source apportionment, reactivity, secondary transformations, and their prioritization using fuzzy-AHP method in a coal-mining city in India.

This study assessed the air quality status in different functional zones of Dhanbad-a coal-mining and industrial hub, based on the measurement of aromatic and halogenated volatile organic compounds (VOCs) using gas chromatography. The study encompasses source apportionment of VOCs and their chemical reactivity in terms of OH radical loss rate (LOH), ozone-forming potential (OFP), and their secondary organic aerosol forming potential (SOAp). Furthermore, prioritization of VOCs based on a fuzzy-analytical hierarchical process (F-AHP) has also been done. The results found xylene species to have the highest concentration in all three seasons across traffic-intersection and industrial zones and toluene at the institutional zone. The study identified four sources using positive matrix factorization (PMF) model, viz., mixed traffic exhaust (35%), coal combustion sources (30%), industrial (26%), and solvent usage (9%). LOH and SOAp were ~ 16 times more at the industrial and traffic-intersection zone than the institutional zone. The aromatic species contributed 97% to the OFP, and many species exhibited less contribution to the mixing ratio of VOCs but displayed a high contribution to LOH, OFP, and SOAp, suggesting the need to prefer reactivity-based strategies in addition to concentration-based strategies in the future for their regulation. The F-AHP-based priority component analysis identified 16 species out of 29 in the priority watch list (nine in tier-1, four in tier-2, and three in tier-3). The paucity of data and lack of ambient air quality standards on VOCs (except benzene) make it difficult to determine which aspect should be dealt with first and which species require more attention. Therefore, the F-AHP method used in this study could help identify the influencing parameters to be considered while devising efficient VOC management policies.

Machine learning-based soil quality assessment for enhancing environmental monitoring in iron ore mining-impacted ecosystems.

In November 2015, a catastrophic rupture of the Fundão dam in Mariana (Brazil), resulted in extensive socio-economic and environmental repercussions that persist to this day. In response, several reforestation programs were initiated to remediate the impacted regions. However, accurately assessing soil health in these areas is a complex endeavor. This study employs machine learning techniques to predict soil quality indicators that effectively differentiate between the stages of recovery in these areas. For this, a comprehensive set of soil parameters, encompassing 3 biological, 16 chemical, and 3 physical parameters, were evaluated for samples exposed to mining tailings and those unaffected, totaling 81 and 6 samples, respectively, which were evaluated over 2 years. The most robust model was the decision tree with a restriction of fewer levels to simplify the tree structure. In this model, Cation Exchange Capacity (CEC), Microbial Biomass Carbon (MBC), Base Saturation (BS), and Effective Cation Exchange Capacity (eCEC) emerged as the most pivotal factors influencing model fitting. This model achieved an accuracy score of 92% during training and 93% during testing for determining stages of recovery. The model developed in this study has the potential to revolutionize the monitoring efforts conducted by regulatory agencies in these regions. By reducing the number of parameters that necessitate evaluation, this enhanced efficiency promises to expedite recovery monitoring, simultaneously enhancing cost-effectiveness while upholding the analytical rigor of assessments.

Arsenic, cadmium, lead, antimony bioaccessibility and relative bioavailability in legacy gold mining waste.

Bioaccessibility and relative bioavailability of As, Cd, Pb and Sb was investigated in 30 legacy gold mining wastes (calcine sands, grey battery sands, tailings) from Victorian goldfields (Australia). Pseudo-total As concentration in 29 samples was 1.45-148-fold higher than the residential soil guidance value (100 mg/kg) while Cd and Pb concentrations in calcine sands were up to 2.4-fold and 30.1-fold higher than the corresponding guidance value (Cd: 20 mg/kg and Pb: 300 mg/kg). Five calcine sands exhibited elevated Sb (31.9-5983 mg/kg), although an Australian soil guidance value is currently unavailable. Arsenic bioaccessibility (n = 30) and relative bioavailability (RBA; n = 8) ranged from 6.10-77.6% and 10.3-52.9% respectively. Samples containing > 50% arsenopyrite/scorodite showed low As bioaccessibility (<20.0%) and RBA (<15.0%). Co-contaminant RBA was assessed in 4 calcine sands; Pb RBA ranged from 73.7-119% with high Pb RBA associated with organic and mineral sorbed Pb and, lower Pb RBA observed in samples containing plumbojarosite. In contrast, Cd RBA ranged from 55.0-67.0%, while Sb RBA was < 5%. This study highlights the importance of using multiple lines of evidence during exposure assessment and provides valuable baseline data for co-contaminants associated with legacy gold mining activities.

Impacts of mining on vegetation phenology and sensitivity assessment of spectral vegetation indices to mining activities in arid/semi-arid areas.

Measuring the impact of mining activities on vegetation phenology and assessing the sensitivity of vegetation indices (VIs) to it are crucial for understanding land degradation in mining areas and enhancing the carbon sink capacity following the ecological restoration of mines. To this end, we have developed a novel technical framework to quantify the impact of mining activities on vegetation, and applied it to the Bainaimiao copper mining area in Inner Mongolia. Phenological indices are extracted based on the VI time series data of Sentinel-2, and changes in phenological differences in various directions are used to quantify the impact of mining activities on vegetation. Finally, indicators such as mean difference, standard deviation, index value distribution interval, and concentration of index value distribution were selected to assess the sensitivity of the Enhanced Vegetation Index (EVI), Green Chlorophyll Index (GCI), Global Environmental Monitoring Index (GEMI), Green Normalized Difference Vegetation Index (GNDVI), Normalized Difference Vegetation Index (NDVI), Renormalized Difference Vegetation Index (RDVI), Red-Edge Chlorophyll Index (RECI), and Soil-Adjusted Vegetation Index (SAVI) to mining activities. The results of the study show that the impact of mining activities on surrounding vegetation extends to an area three times larger than the actual mining activity area. When compared with the reference and unaffected areas, the affected area experienced a delay of approximately 10 days in seasonal vegetation development. Environmental pollution caused by the tailings pond was identified as the primary factor influencing this delay. Significant variations in the sensitivity of each VI to assess mining activities in arid/semi-arid areas were observed. Notably, GCI, GNDVI and RDVI displayed relatively high sensitivity to discrepancies in the spectral attributes of vegetation within the affected area, while SAVI reflected the overall spectral stability of the vegetation in the affected area. The research findings have the potential to provide valuable technical guidance for holistic environmental management in mining areas and hold great significance in preventing further land degradation and supporting ecological restoration in mining areas.

Evaluation of rock stability challenges affecting the formation of sustainable pit lake towards mine closure following crown pillar extraction in open pit-underground mines.

The extraction of high-grade ore from the crown pillar (CP) in open pit-underground mines poses stability challenges and potential environmental risks. While an open pit has the potential to transition into a pit lake, the extraction of CP can induce failure in the surrounding walls, preventing the formation of the lake. There is also a concern that the backfilling material may not effectively confine toxic water within the pit, thereby risking contamination of the underground environment. To address these issues, a case study was conducted using FLAC3D and 3DEC models to evaluate the extent of failure caused by CP extraction. On-site observation, along with modelling, has revealed rock damage, including deformation stretching about 4 m from the pit wall and extending vertically from the pit floor to the ramp. The study identified three primary factors leading to pit wall failure or damage: steep pit slopes reaching approximately 70° near the pit floor, an underestimated CP thickness by about 4 m, and the concurrent extraction of ore from the pit wall alongside CP. Based on these findings, rehabilitation measures are suggested, including excavation of the deformed wall and cantilever, as well as partial pit backfilling. There is a substantial increase in the volume of backfill material as the extent of failure increases, which raise concerns about the decision-making process regarding CP extraction. Therefore, this article aims to raise environmental awareness and evaluate whether the benefits of ore extraction outweigh the considerations for pit wall support and the rehabilitation efforts during mine closure.

Comprehensive insight into mercury contamination in atmospheric, terrestrial and aquatic ecosystems surrounding a typical antimony-coal mining district.

This study comprehensively investigated mercury (Hg) contents of various environmental compartments in a typical antimony-coal mining area with intensive industrial activities over the past 120 years to analyze Hg environmental behaviors and evaluate Hg risks. The total mercury (THg) contents in river water, sediments, soils, PM10, dust falls, vegetables and corns were 1.16 ± 0.63 µg/L, 2.01 ± 1.64 mg/kg, 1.87 ± 3.88 mg/kg, 7.87 ± 18.68 ng/m3, 13.01 ± 14.53 mg/kg, 0.30 ± 0.34 mg/kg and 3.11 ± 0.51 µg/kg, respectively. The δ202Hg values in soils and dust falls were - 1.58 ∼ 0.12‰ and 0.25 ∼ 0.30‰, respectively. Environmental samples affected by industrial activities in the Xikuangshan (XKS) presented higher THg and δ202Hg values. Binary mixing model proved that atmospheric deposition with considerable Hg deposition flux (0.44 ∼ 6.40, 3.12 ± 2.20 mg/m2/y) in the XKS significantly contributed to Hg accumulations on surface soils. Compared with soils, sediments with more frequent paths and higher burst probabilities presented higher dynamic Hg risks. Children were faced higher health risk of multiple Hg exposure than adults. Furthermore, the health risk of THg by consuming leaf vegetables deserved more attention. These findings provided scientific basis for managing Hg contamination.